Slurry Tanker T546/2 -16000 Liters

Standard Equipment

1. Tank

   • Tank hot-dip galvanized on both sides

   • Tank passivation protecting fresh galvanization from the effects of slurry

   • Rear hatch ø700mm – hatch cover on a hinge

   • Tubular filling indicator with sight glass

   • Discharge nozzle with 1 ½” valve – at the lowest point of the tank

   • Sight glass 4” on the rear bottom plate

   • Upper hatch ø350mm

   • Safety valve 4”

   • 8” nozzle on top of the tank, sealed – prepared for mounting a rubber filling funnel

   Vehicle construction: frame-type

   • Frame-type – tank mounted on a frame made of closed-section steel profiles

   • Replaceable hitch – bolted ø50mm

   • Mechanically adjustable support leg

   • Wheelset: two leaf-sprung axles

   • Tires according to table

   • Mudguards

   • Pneumatic dual-circuit braking system with 4-stage braking force regulation

   • Hand parking brake

   • Compressor – type according to table

   • Drive 540 rpm or 1000 rpm – optional

   • Reinforced temperature-resistant hoses connecting fittings

   • Overflow protection via double-ball valve with sight glass on top of the tank and a siphon with sight glass

   • Pressure/vacuum gauge (manovacuumeter)

   • Two safety valves: overpressure up to 0.05 MPa and underpressure down to -0.05 MPa

   • Oil separator – wet air filter, silencer reducing compressor noise

   • Suction nozzles 6” (ø150mm)

   • Main discharge nozzle in the rear hatch cover 6” – with 6” hydraulic slide valve

   • Front left and right nozzles – sealed, prepared for manual slide valve installation

   • Rear nozzle – sealed, prepared for manual slide valve installation

   • Electrical system 12V and lighting

   • Hose 6” (ø150)

   • Transport handles for suction hose

   • Suction hose with intake basket – protects from large debris suction

   • Suction hose length – 6 meters

   Spreading device

   • Profiled spreading shovel POMOT 94 pattern, spreading width up to 14m

   Homologation certificate

   • Enables registration and driving on public roads

   ---

   Power take-off shaft (PTO)

   VERSION	SUSPENSION	TIRE DIMENSIONS	TIRES	COMPRESSOR TYPE
   ECONOMIC	2 leaf-sprung axles (rear steering axle)	1235×500	550/60×22.5	MEC or KD 8000
   STANDARD	2 leaf-sprung axles (rear steering axle)	1230×600	600/55×22.5	MEC 9000 or KD 10000
   CLASIC	2 leaf-sprung axles (rear steering axle)	1340×600	600/55×26.5	MEC 11000 or KD 10000
   PREMIUM	2 leaf-sprung axles (rear steering axle)	1340×700	700/50×26.5	MEC 13500 or KD 12000